8Gb RPi...No USB keyboard/mouse

greg · September 4, 2020, 2:24pm

Hi all! 1st post! Excited to get PiSound going. Ok, here goes:

did all the patching carefully and didn’t corrupt the card
installed all the modules just fine
did the

    max_usb_current=1

…mod in /boot/config.txt, but still can’t get any USB keyboard, mouse etc. to work on the USB.

Any ideas? Thanks in advance from Oklahoma, USA!

Giedrius · September 4, 2020, 2:29pm

Hi, see this post for the solution: Patchbox Gets Corrupted on First Boot (Raspberry Pi 4 8GB)

greg · September 4, 2020, 2:43pm

Hello and thanks for the rapid response.

If I switch to the regular RPi kernel, will the PiSound work 100% normally?

Giedrius · September 4, 2020, 2:57pm

Yes, it will work just fine.

greg · September 4, 2020, 3:23pm

That got it! Thanks much. I think the sequence of the “memory, turn on usb current, why is this corrupting?” was too many changes for me to figure out.

Let me know when you want to test, I have extra sd cards.

Thanks again.