Hey, @Jedi_Appr0_0 , I did this for another user in a similar position awhile back.
The first diagram…
…which sketches the inputs & outputs for the solution being aimed for, might be similar to where you’re at.
I find one of the useful things about an “In - Out” drawing like this is it brings out what you know…
…and, more importantly, what you still need to find out.
Often you can find out a lot about the inputs from a device, just by plugging it in to Midihub and watching the MIDI Monitor as you do certain things.
Knowing what you need to send out usually to destination devices means looking up the manuals.
Once you get there you can seek much more specific questions like
When I connect Kaossilator → Midihub A directly and press buttons A,B,C, I see messages X,Y,Z in the MIDI Monitor
When I try to send it via KS37, however, I don’t see anything
(PS. that might have an answer in the KS37 domain!)
or
I have Kaoss sending Ch.6 CC#111 - 113 in MIDI-A.
I want them to control my synth on Ch.8 CC#69 - 67 on MIDI-DHow do I do this?
PS. I’d like CC#70 to be restircted to its sweet spot between 32 and 96 if possible