Hi there, i have a problem after updating to Version 1.16.0. I use the Midihub Clock Pipe as Master Clock for my gear and have mapped the start and stop commands to my midi controller. After the update, it is possible to start the clock and stop the clock as before, but when i want to start the clo…

Ok, I see what you mean, you’re right. I’ve fixed the Clock pipe in 1.16.1 . The Midihub Editor should suggest to do the update automatically.

Hey, could you upload your Preset .mhp here, or just send it to me via PM?

Hi, thanks for the reply. I attached the Midihub Preset. Thank you Midihub Proj.mhp (4.6 KB)

Hey, I tried with 1.16.0 and it seems to work ok, as long as your mapped CCs hit value 127. I couldn’t reproduce the problem. The 1.15.2 firmware behaves the same way. Is there something else that could be impacting this?

Hey @Giedrius , there is a behaviour difference between 1.15.2 & 1.16.0, I think. Using toggling CC#11,12 buttons (0 ↔ 127): in 1.15.2, Clock Start & Stop still work if you remove the 0 value from the map stream with 1.16, it doesn’t @andi2239 , are you sending just 127 in, or is your …

The Clock pipe’s Start and Stop buttons expect either CC with value = 127 to trigger, or Note On with velocity >= 1. Toggling mode is not well suited for Start and Stop buttons, as it would trigger the action every 2nd toggle action (when it goes to ON state)

I’m not getting this, G: If I only send 127 to Start/Stop in 1.16, it doesn’t function. It wants a <127 value inbetween the 127s. 1.15.2 behaviour also fits with the “Toggling mode is not well suited” recommendation, but it doesn’t need the intervening value <127

Midihub 1.16.0 - Clock Pipe Midi Mappings - #9 by resonotter - Support

Topic		Replies	Views	Activity
Midihub 1.16.1 - Midi Mapping needs new value to register Support	5	65	September 13, 2025
Midihub clock not seen by Moog synths Support	5	519	November 23, 2021
Midihub // Filter: Start/Stop Support	8	680	June 12, 2020
[Download] Midihub 1.16.1 - Comments, Mappings and More! Releases	29	1131	January 13, 2026
Convert CC to Start/Stop messages...? Support	14	1843	February 4, 2021
Clock as fallback device Midihub	15	219	February 25, 2024
MIDI clock not send Support	7	202	April 5, 2024
Inaccurate Midi Clock When Passing Through Midihub? Support	17	1193	September 2, 2020
New Midihub user in the magical world of Pipes > Clock, Start, Stop! Support	4	508	November 25, 2020
Looking for a one cycle CC LFO for SYNC Restart Midihub	19	100	March 22, 2026