Hey! Using the pisound so far only to stream music to my monitors using volumio which works perfectly. Now I am trying to use it to listen to it using the input TRS jacks and somehow I don’t hear anything. The red led is lighting up as expected. I have installed pisound-config and changed output t…

Okay, I had to investigate a lot further and this is a common problem for headless systems. My problem now is that it works when I start it manually with the user pi but when I make a bash script which gets triggered by pisound-btn I get the same error as before. I tried to add everything as in my…

Yes! Also would love to record it on the way.

There’s multiple ways to achieve the same: Use a command like: arecord -D hw:pisound -c 2 -r 48000 -f S16_LE | tee recording.wav | aplay -D hw:pisound - or use Audacity for graphical user interface (latest version(s) are known to have an issue when recording and playing back at the same time: Aud…

Uhm… so in the first place I‘d like to hear the sound. So when I understood correctly that is achieved by the aplay command. So when I want to hear something I put that command best to the pisound button? This is not working for me unfortunately … also it breaks everything else and I can‘t even ctr…

Ok, now that you start to define the problem you want to solve, we can get closer to finding the right solution for it. :slight_smile: The most seamless way then would be to have a JACK server running in the background all the time, forwarding data from input to the output, and a script for the but…

I haven‘t implemented the button - just used aplay command over ssh. Volumio „OS“ is running and aplay also broke output of volumio / Spotify / airplay which I‘d like to keep at all times. edit: Okay … aplay now stopped and Spotify works again - I could live with that happening if it comes back on…

Then you have to find a way to pipe through the input of Pisound to the output in a way that is friendly to all the software you want to keep running. I don’t know about the audio backends that are used by the listed software… A virtual audio loopback device ( https://www.alsa-project.org/main/index…

Sorry but this solution seems a bit too intense for me right now. Your aplay command is not working because it needs to have a file, right? It‘s not routing anything. Would be nice to route the audio in to the audio out for a starter… as I said I would be fine with not being able to use streaming …

aplay and arecord commands take exclusive control of the hardware, so stop any background applications which are working with sound before running them. To record to a file and play it back at the same time, run: arecord -D hw:pisound -c 2 -r 48000 -f S16_LE | tee recording.wav | aplay -D hw:pisou…

Ah, okay! Works - thanks! - but unfortunately it adds a loooot of latency - I play live music so this is unacceptable. So I guess I need to take the jackd route now…

JACK is the route for low latency audio. I’d recommend using MODEP image for this then.

[Solved] No audio input going to output

Pisound Support

Topic		Replies	Views
Alsamixer says "pisound has no capture device" Support	8	2133	March 14, 2018
Monitor Pisound input via output while writing to microSD card? Support	3	1213	December 3, 2018
Audacity and Jack - recording input level Patchbox OS	6	1205	August 20, 2019
Pisound and Darkice / Icecast Support	26	4926	March 13, 2019
No sound from pisound output Support	13	719	February 1, 2021
Record audio with the button Patchbox OS	34	2032	May 25, 2022
Unable to hear anything on OUT Pisound	2	407	November 16, 2020
USB Soundcard to Pisound output Patchbox OS	8	972	May 9, 2021
Microphone in Issues Support	7	1655	May 5, 2020
No audio on output Support	11	626	December 4, 2020

[Solved] No audio input going to output

Related topics