[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] [ 0.000000] Linux version 6.12.47+rpt-rpi-2712 (serge@raspberrypi.com) (aarch64-linux-gnu-gcc-12 (Debian 12.2.0-14+deb12u1) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.12.47-1+rpt1~bookworm (2025-09-16) [ 0.000000] KASLR enabled [ 0.000000] random: crng init done [ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000003a000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x000000003a000000..0x000000003dffffff (65536 KiB) map reusable linux,cma [ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0 [ 0.000000] OF: reserved mem: 0x000000003fd235a0..0x000000003fd235d7 (0 KiB) nomap non-reusable nvram@0 [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] Faking node 0 at [mem 0x0000000000000000-0x000000003fffffff] (1024MB) [ 0.000000] Faking node 1 at [mem 0x0000000040000000-0x000000007fffffff] (1024MB) [ 0.000000] Faking node 2 at [mem 0x0000000080000000-0x00000000bfffffff] (1024MB) [ 0.000000] Faking node 3 at [mem 0x00000000c0000000-0x00000000ffffffff] (1024MB) [ 0.000000] Faking node 4 at [mem 0x0000000100000000-0x000000013fffffff] (1024MB) [ 0.000000] Faking node 5 at [mem 0x0000000140000000-0x000000017fffffff] (1024MB) [ 0.000000] Faking node 6 at [mem 0x0000000180000000-0x00000001bfffffff] (1024MB) [ 0.000000] Faking node 7 at [mem 0x00000001c0000000-0x00000001ffffffff] (1024MB) [ 0.000000] NUMA: Initialized distance table, cnt=8 [ 0.000000] NODE_DATA(0) allocated [mem 0x3f7fd200-0x3f7fffff] [ 0.000000] NODE_DATA(1) allocated [mem 0x7fffd200-0x7fffffff] [ 0.000000] NODE_DATA(2) allocated [mem 0xbfffd200-0xbfffffff] [ 0.000000] NODE_DATA(3) allocated [mem 0xffffd200-0xffffffff] [ 0.000000] NODE_DATA(4) allocated [mem 0x13fffd200-0x13fffffff] [ 0.000000] NODE_DATA(5) allocated [mem 0x17fffd200-0x17fffffff] [ 0.000000] NODE_DATA(6) allocated [mem 0x1bfffd200-0x1bfffffff] [ 0.000000] NODE_DATA(7) allocated [mem 0x1ffb99200-0x1ffb9bfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] [ 0.000000] node 0: [mem 0x0000000000080000-0x000000003f7fffff] [ 0.000000] node 1: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] node 2: [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] node 3: [mem 0x00000000c0000000-0x00000000ffffffff] [ 0.000000] node 4: [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] node 5: [mem 0x0000000140000000-0x000000017fffffff] [ 0.000000] node 6: [mem 0x0000000180000000-0x00000001bfffffff] [ 0.000000] node 7: [mem 0x00000001c0000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003f7fffff] [ 0.000000] Initmem setup node 1 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 2 [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 3 [mem 0x00000000c0000000-0x00000000ffffffff] [ 0.000000] Initmem setup node 4 [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Initmem setup node 5 [mem 0x0000000140000000-0x000000017fffffff] [ 0.000000] Initmem setup node 6 [mem 0x0000000180000000-0x00000001bfffffff] [ 0.000000] Initmem setup node 7 [mem 0x00000001c0000000-0x00000001ffffffff] [ 0.000000] On node 1, zone DMA: 512 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 15 pages/cpu s193496 r8192 d44072 u245760 [ 0.000000] pcpu-alloc: s193496 r8192 d44072 u245760 alloc=15*16384 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: SSBS not fully self-synchronizing [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=2C:CF:67:32:DC:7E vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=f4d2a12c-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=AT [ 0.000000] cgroup: Disabling memory control group subsystem [ 0.000000] mempolicy: NUMA default policy overridden to 'interleave:0-7' [ 0.000000] DMA IOMMU NUMA default policy overridden to 'interleave:0-7' [ 0.000000] Fallback order for Node 0: 0 1 2 3 4 5 6 7 [ 0.000000] Fallback order for Node 1: 1 2 3 4 5 6 7 0 [ 0.000000] Fallback order for Node 2: 2 3 4 5 6 7 0 1 [ 0.000000] Fallback order for Node 3: 3 4 5 6 7 0 1 2 [ 0.000000] Fallback order for Node 4: 4 5 6 7 0 1 2 3 [ 0.000000] Fallback order for Node 5: 5 6 7 0 1 2 3 4 [ 0.000000] Fallback order for Node 6: 6 7 0 1 2 3 4 5 [ 0.000000] Fallback order for Node 7: 7 0 1 2 3 4 5 6 [ 0.000000] Built 8 zonelists, mobility grouping on. Total pages: 523776 [ 0.000000] Policy zone: Normal [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=8 [ 0.000000] ftrace: allocating 45292 entries in 45 pages [ 0.000000] ftrace: allocated 45 pages with 4 groups [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000089] Console: colour dummy device 80x25 [ 0.000093] printk: legacy console [tty1] enabled [ 0.000297] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.000303] pid_max: default: 32768 minimum: 301 [ 0.000394] LSM: initializing lsm=capability [ 0.001874] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, vmalloc) [ 0.002600] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, vmalloc) [ 0.002645] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, vmalloc) [ 0.002667] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, vmalloc) [ 0.003377] rcu: Hierarchical SRCU implementation. [ 0.003387] rcu: Max phase no-delay instances is 1000. [ 0.003430] Timer migration: 1 hierarchy levels; 8 children per group; 0 crossnode level [ 0.003760] EFI services will not be available. [ 0.003832] smp: Bringing up secondary CPUs ... [ 0.004038] Detected PIPT I-cache on CPU1 [ 0.004074] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] [ 0.004275] Detected PIPT I-cache on CPU2 [ 0.004303] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] [ 0.004489] Detected PIPT I-cache on CPU3 [ 0.004508] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] [ 0.004533] smp: Brought up 8 nodes, 4 CPUs [ 0.004549] SMP: Total of 4 processors activated. [ 0.004551] CPU: All CPU(s) started at EL2 [ 0.004554] CPU features: detected: 32-bit EL0 Support [ 0.004558] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.004561] CPU features: detected: Common not Private translations [ 0.004564] CPU features: detected: CRC32 instructions [ 0.004567] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.004570] CPU features: detected: LSE atomic instructions [ 0.004572] CPU features: detected: Privileged Access Never [ 0.004574] CPU features: detected: RAS Extension Support [ 0.004577] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.004602] alternatives: applying system-wide alternatives [ 0.006035] CPU features: detected: Hardware dirty bit management on CPU0-3 [ 0.006208] Memory: 8137168K/8380416K available (14208K kernel code, 2418K rwdata, 4944K rodata, 5696K init, 647K bss, 151184K reserved, 65536K cma-reserved) [ 0.006380] devtmpfs: initialized [ 0.008269] Enabled cp15_barrier support [ 0.008276] Enabled setend support [ 0.008314] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.008322] futex hash table entries: 1024 (order: 2, 65536 bytes, vmalloc) [ 0.008434] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL [ 0.008437] 0 pages in range for non-PLT usage [ 0.008438] 129304 pages in range for PLT usage [ 0.008518] pinctrl core: initialized pinctrl subsystem [ 0.008635] DMI not present or invalid. [ 0.011363] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.011736] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.011768] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.011799] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.011813] audit: initializing netlink subsys (disabled) [ 0.011861] audit: type=2000 audit(0.000:1): state=initialized audit_enabled=0 res=1 [ 0.011959] thermal_sys: Registered thermal governor 'step_wise' [ 0.011967] cpuidle: using governor menu [ 0.012038] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.012062] ASID allocator initialised with 32768 entries [ 0.012276] Serial: AMBA PL011 UART driver [ 0.013002] /soc@107c000000/interrupt-controller@7fff9000: Fixed dependency cycle(s) with /soc@107c000000/interrupt-controller@7fff9000 [ 0.013155] bcm2835-mbox 107c013880.mailbox: mailbox enabled [ 0.013279] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 16, base_baud = 0) is a PL011 rev3 [ 0.013289] printk: legacy console [ttyAMA10] enabled [ 1.060135] raspberrypi-firmware soc@107c000000:firmware: Attached to firmware from 2025-12-08T19:29:54, variant start_cd [ 1.075148] raspberrypi-firmware soc@107c000000:firmware: Firmware hash is 2226a85300000000000000000000000000000000 [ 1.094098] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 [ 1.101429] iommu: Default domain type: Translated [ 1.106268] iommu: DMA domain TLB invalidation policy: strict mode [ 1.120268] SCSI subsystem initialized [ 1.124059] usbcore: registered new interface driver usbfs [ 1.129571] usbcore: registered new interface driver hub [ 1.134904] usbcore: registered new device driver usb [ 1.140042] pps_core: LinuxPPS API ver. 1 registered [ 1.145023] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.154194] PTP clock support registered [ 1.158375] vgaarb: loaded [ 1.161169] clocksource: Switched to clocksource arch_sys_counter [ 1.302811] VFS: Disk quotas dquot_6.6.0 [ 1.306788] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) [ 1.315073] NET: Registered PF_INET protocol family [ 1.320131] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, vmalloc) [ 1.329344] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, vmalloc) [ 1.338031] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, vmalloc) [ 1.345900] TCP established hash table entries: 65536 (order: 5, 524288 bytes, vmalloc) [ 1.354126] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, vmalloc) [ 1.362303] TCP: Hash tables configured (established 65536 bind 65536) [ 1.368960] MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, vmalloc) [ 1.376609] UDP hash table entries: 4096 (order: 3, 131072 bytes, vmalloc) [ 1.383573] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, vmalloc) [ 1.391009] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.396818] RPC: Registered named UNIX socket transport module. [ 1.402762] RPC: Registered udp transport module. [ 1.407479] RPC: Registered tcp transport module. [ 1.412196] RPC: Registered tcp-with-tls transport module. [ 1.417703] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.424169] PCI: CLS 0 bytes, default 64 [ 1.428178] Trying to unpack rootfs image as initramfs... [ 1.438248] kvm [1]: nv: 554 coarse grained trap handlers [ 1.443803] kvm [1]: IPA Size Limit: 40 bits [ 1.448104] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance) [ 1.456872] kvm [1]: vgic interrupt IRQ9 [ 1.460822] kvm [1]: VHE mode initialized successfully [ 1.469539] Initialise system trusted keyrings [ 1.474174] workingset: timestamp_bits=42 max_order=19 bucket_order=0 [ 1.481027] NFS: Registering the id_resolver key type [ 1.486113] Key type id_resolver registered [ 1.490310] Key type id_legacy registered [ 1.494355] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.501088] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.508746] Key type asymmetric registered [ 1.512867] Asymmetric key parser 'x509' registered [ 1.517795] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.525284] io scheduler mq-deadline registered [ 1.529839] io scheduler kyber registered [ 1.533889] io scheduler bfq registered [ 1.538121] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7d510600, parent irq: 27) [ 1.548237] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7c502000, parent irq: 28) [ 1.558341] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d508380, parent irq: 29) [ 1.567047] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d508400, parent irq: 30) [ 1.575741] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d503000, parent irq: 31) [ 1.588940] Freeing initrd memory: 17632K [ 1.593031] ledtrig-cpu: registered to indicate activity on CPUs [ 1.599701] simple-framebuffer 3f800000.framebuffer: framebuffer at 0x3f800000, 0x3f4800 bytes [ 1.608373] simple-framebuffer 3f800000.framebuffer: format=r5g6b5, mode=1920x1080x16, linelength=3840 [ 1.618782] Console: switching to colour frame buffer device 240x67 [ 1.626048] simple-framebuffer 3f800000.framebuffer: fb0: simplefb registered! [ 1.662629] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 1.669227] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 33, base_baud = 6000000) is a Broadcom BCM7271 UART [ 1.679844] serial serial0: tty port ttyS0 registered [ 1.685176] iproc-rng200 107d208000.rng: hwrng registered [ 1.690633] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) [ 1.699117] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe [ 1.707496] brd: module loaded [ 1.711458] loop: module loaded [ 1.714699] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.722053] Loading iSCSI transport class v2.0-870. [ 1.727635] usbcore: registered new interface driver lan78xx [ 1.733332] usbcore: registered new interface driver smsc95xx [ 1.739146] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.744931] dwc_otg: FIQ enabled [ 1.744933] dwc_otg: NAK holdoff enabled [ 1.744934] dwc_otg: FIQ split-transaction FSM enabled [ 1.744936] Module dwc_common_port init [ 1.745135] usbcore: registered new interface driver uas [ 1.750481] usbcore: registered new interface driver usb-storage [ 1.756579] mousedev: PS/2 mouse device common for all mice [ 1.769646] rpi-rtc soc@107c000000:rpi_rtc: registered as rtc0 [ 1.776876] rpi-rtc soc@107c000000:rpi_rtc: setting system clock to 2025-12-21T09:57:32 UTC (1766311052) [ 1.786689] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! [ 1.793251] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.801616] sdhci: Secure Digital Host Controller Interface driver [ 1.807836] sdhci: Copyright(c) Pierre Ossman [ 1.812251] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.818003] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 1.824496] hid: raw HID events driver (C) Jiri Kosina [ 1.829690] usbcore: registered new interface driver usbhid [ 1.835285] usbhid: USB HID core driver [ 1.839408] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 (0,8000003f) counters available [ 1.848974] NET: Registered PF_PACKET protocol family [ 1.854069] Key type dns_resolver registered [ 1.861775] registered taskstats version 1 [ 1.865950] Loading compiled-in X.509 certificates [ 1.872189] Demotion targets for Node 0: null [ 1.876567] Demotion targets for Node 1: null [ 1.880942] Demotion targets for Node 2: null [ 1.885554] Demotion targets for Node 3: null [ 1.890287] Demotion targets for Node 4: null [ 1.895002] Demotion targets for Node 5: null [ 1.899720] Demotion targets for Node 6: null [ 1.904463] Demotion targets for Node 7: null [ 1.909338] Key type .fscrypt registered [ 1.913600] Key type fscrypt-provisioning registered [ 1.919574] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@1000120000 ranges: [ 1.927432] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@1000120000, using [bus 00-ff] [ 1.937217] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 [ 1.945860] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 [ 1.954511] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 [ 1.963143] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 [ 1.971768] brcm-pcie 1000120000.pcie: IB MEM 0x1000130000..0x1000130fff -> 0xfffffff000 [ 1.981717] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0002:00 [ 1.988511] pci_bus 0002:00: root bus resource [bus 00-ff] [ 1.994339] pci_bus 0002:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) [ 2.005234] pci_bus 0002:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) [ 2.016752] pci 0002:00:00.0: [14e4:2712] type 01 class 0x060400 PCIe Root Port [ 2.024420] pci 0002:00:00.0: PCI bridge to [bus 00] [ 2.029741] pci 0002:00:00.0: bridge window [mem 0x1f80000000-0x1fbfffffff] [ 2.037253] pci 0002:00:00.0: PME# supported from D0 D3hot [ 2.043666] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.153173] brcm-pcie 1000120000.pcie: clkreq-mode set to default [ 2.159620] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) [ 2.166606] pci 0002:01:00.0: [1de4:0001] type 00 class 0x020000 PCIe Endpoint [ 2.174187] pci 0002:01:00.0: BAR 0 [mem 0xffffc000-0xffffffff] [ 2.180461] pci 0002:01:00.0: BAR 1 [mem 0xffc00000-0xffffffff] [ 2.186725] pci 0002:01:00.0: BAR 2 [mem 0xffff0000-0xffffffff] [ 2.193035] pci 0002:01:00.0: supports D1 [ 2.197360] pci 0002:01:00.0: PME# supported from D0 D1 D3hot D3cold [ 2.209179] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.216128] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]: assigned [ 2.224297] pci 0002:01:00.0: BAR 1 [mem 0x1f00000000-0x1f003fffff]: assigned [ 2.231772] pci 0002:01:00.0: BAR 2 [mem 0x1f00400000-0x1f0040ffff]: assigned [ 2.239247] pci 0002:01:00.0: BAR 0 [mem 0x1f00410000-0x1f00413fff]: assigned [ 2.246714] pci 0002:00:00.0: PCI bridge to [bus 01] [ 2.251994] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] [ 2.259459] pci_bus 0002:00: resource 4 [mem 0x1f00000000-0x1ffffffffb] [ 2.266402] pci_bus 0002:00: resource 5 [mem 0x1c00000000-0x1effffffff pref] [ 2.273779] pci_bus 0002:01: resource 1 [mem 0x1f00000000-0x1f005fffff] [ 2.280724] pci 0002:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 2.289510] pci 0002:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 [ 2.298355] pcieport 0002:00:00.0: enabling device (0000 -> 0002) [ 2.304810] pcieport 0002:00:00.0: PME: Signaling with IRQ 38 [ 2.310930] pcieport 0002:00:00.0: AER: enabled with IRQ 38 [ 2.316885] rp1 0002:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 [ 2.326284] rp1 0002:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 [ 2.335865] rp1 0002:01:00.0: enabling device (0000 -> 0002) [ 2.342483] rp1 0002:01:00.0: chip_id 0x20001927 [ 2.352184] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 2.360936] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success [ 2.368427] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 2.377191] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success [ 2.384634] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 2.393383] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success [ 2.400717] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 100 [ 2.409117] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO [ 2.410306] mmc1: CQHCI version 5.10 [ 2.414662] mmc0: CQHCI version 5.10 [ 2.424691] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 106 (2c:cf:67:32:dc:7e) [ 2.436067] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels [ 2.444923] xhci-hcd xhci-hcd.0: xHCI Host Controller [ 2.450339] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 [ 2.458206] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit [ 2.458466] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000808000000810 [ 2.476001] xhci-hcd xhci-hcd.0: irq 131, io mem 0x1f00200000 [ 2.482179] xhci-hcd xhci-hcd.0: xHCI Host Controller [ 2.487595] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 [ 2.495195] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed [ 2.501694] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.510341] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.517940] usb usb1: Product: xHCI Host Controller [ 2.523181] usb usb1: Manufacturer: Linux 6.12.47+rpt-rpi-2712 xhci-hcd [ 2.530170] usb usb1: SerialNumber: xhci-hcd.0 [ 2.535079] hub 1-0:1.0: USB hub found [ 2.539199] hub 1-0:1.0: 2 ports detected [ 2.543655] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 2.552303] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.558496] mmc0: new ultra high speed SDR104 SDHC card at address 1234 [ 2.559915] usb usb2: Product: xHCI Host Controller [ 2.560637] mmcblk0: mmc0:1234 SA32G 29.1 GiB [ 2.560685] usb usb2: Manufacturer: Linux 6.12.47+rpt-rpi-2712 xhci-hcd [ 2.562606] mmcblk0: p1 p2 [ 2.568216] usb usb2: SerialNumber: xhci-hcd.0 [ 2.568649] mmcblk0: mmc0:1234 SA32G 29.1 GiB [ 2.569010] hub 2-0:1.0: USB hub found [ 2.600856] hub 2-0:1.0: 1 port detected [ 2.605351] xhci-hcd xhci-hcd.1: xHCI Host Controller [ 2.610755] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 [ 2.613700] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit [ 2.618773] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000808000000810 [ 2.636086] xhci-hcd xhci-hcd.1: irq 136, io mem 0x1f00300000 [ 2.642255] xhci-hcd xhci-hcd.1: xHCI Host Controller [ 2.647681] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 [ 2.655269] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed [ 2.657479] mmc1: new ultra high speed DDR50 SDIO card at address 0001 [ 2.661760] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.677307] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.684945] usb usb3: Product: xHCI Host Controller [ 2.690181] usb usb3: Manufacturer: Linux 6.12.47+rpt-rpi-2712 xhci-hcd [ 2.697164] usb usb3: SerialNumber: xhci-hcd.1 [ 2.702038] hub 3-0:1.0: USB hub found [ 2.706161] hub 3-0:1.0: 2 ports detected [ 2.710606] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 2.719241] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.726826] usb usb4: Product: xHCI Host Controller [ 2.732054] usb usb4: Manufacturer: Linux 6.12.47+rpt-rpi-2712 xhci-hcd [ 2.739043] usb usb4: SerialNumber: xhci-hcd.1 [ 2.743889] hub 4-0:1.0: USB hub found [ 2.747992] hub 4-0:1.0: 1 port detected [ 2.752648] of_cfs_init [ 2.755671] of_cfs_init: OK [ 2.758862] clk: Disabling unused clocks [ 2.771702] PM: genpd: Disabling unused power domains [ 2.779876] Freeing unused kernel memory: 5696K [ 2.784832] Run /init as init process [ 2.788824] with arguments: [ 2.788825] /init [ 2.788826] with environment: [ 2.788827] HOME=/ [ 2.788829] TERM=linux [ 2.801212] usb 1-2: new full-speed USB device number 2 using xhci-hcd [ 2.873486] input: pwr_button as /devices/platform/pwr_button/input/input0 [ 2.899682] v3d 1002000000.v3d: [drm] Transparent Hugepage support is recommended for optimal performance on this platform! [ 2.924333] [drm] Initialized v3d 1.0.0 for 1002000000.v3d on minor 0 [ 2.932515] brcmstb-i2c 107d508200.i2c: @97500hz registered in interrupt mode [ 2.934999] vc4_hvs 107c580000.hvs: bcm2712_iommu_of_xlate: MMU 1000005200.iommu [ 2.949333] vc4_hvs 107c580000.hvs: bcm2712_iommu_probe_device: MMU 1000005200.iommu [ 2.957599] vc4_hvs 107c580000.hvs: bcm2712_iommu_device_group: MMU 1000005200.iommu [ 2.965896] usb 3-2: new full-speed USB device number 2 using xhci-hcd [ 2.966460] vc4_hvs 107c580000.hvs: Adding to iommu group 1 [ 2.978879] vc4_hvs 107c580000.hvs: bcm2712_iommu_attach_dev: MMU 1000005200.iommu [ 2.986969] brcmstb-i2c 107d508280.i2c: @97500hz registered in interrupt mode [ 2.988247] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu [ 3.001803] vc4-drm axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu [ 3.009316] vc4-drm axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu [ 3.016828] vc4-drm axi:gpu: Adding to iommu group 1 [ 3.022128] vc4-drm axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu [ 3.029871] Console: switching to colour dummy device 80x25 [ 3.035475] usb 1-2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 3.035478] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.035480] usb 1-2: Product: USB Receiver [ 3.035481] usb 1-2: Manufacturer: Logitech [ 3.062231] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4]) [ 3.070160] Registered IR keymap rc-cec [ 3.074049] rc rc0: vc4-hdmi-0 as /devices/platform/soc@107c000000/107c701400.hdmi/rc/rc0 [ 3.082311] input: vc4-hdmi-0 as /devices/platform/soc@107c000000/107c701400.hdmi/rc/rc0/input1 [ 3.090896] input: Logitech USB Receiver as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.0/0003:046D:C534.0001/input/input2 [ 3.105386] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc@107c000000/107c701400.hdmi/sound/card0/input3 [ 3.257226] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0-2/input0 [ 3.258121] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4]) [ 3.277384] Registered IR keymap rc-cec [ 3.281257] rc rc1: vc4-hdmi-1 as /devices/platform/soc@107c000000/107c706400.hdmi/rc/rc1 [ 3.289516] input: vc4-hdmi-1 as /devices/platform/soc@107c000000/107c706400.hdmi/rc/rc1/input4 [ 3.299122] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc@107c000000/107c706400.hdmi/sound/card1/input5 [ 3.301749] input: Logitech USB Receiver Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input6 [ 3.310095] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4]) [ 3.323938] input: Logitech USB Receiver Consumer Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input7 [ 3.330911] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4]) [ 3.353326] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4]) [ 3.356810] usb 3-2: New USB device found, idVendor=0408, idProduct=3001, bcdDevice= 0.04 [ 3.360446] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 3.368624] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.368652] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 3.376138] usb 3-2: Product: T231H [ 3.376140] usb 3-2: Manufacturer: Acer [ 3.401218] input: Logitech USB Receiver System Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input8 [ 3.416797] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0-2/input1 [ 3.447453] [drm] Initialized vc4 0.0.0 for axi:gpu on minor 1 [ 3.460217] input: Acer T231H as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.0/0003:0408:3001.0003/input/input11 [ 3.528720] Console: switching to colour frame buffer device 240x67 [ 3.552681] vc4-drm axi:gpu: [drm] fb0: vc4drmfb frame buffer device [ 3.589359] hid-generic 0003:0408:3001.0003: input,hidraw0: USB HID v1.10 Device [Acer T231H] on usb-xhci-hcd.1-2/input0 [ 3.589543] logitech-djreceiver 0003:046D:C534.0001: hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0-2/input0 [ 3.750910] input: Acer T231H as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.0/0003:0408:3001.0003/input/input12 [ 3.773297] hid-multitouch 0003:0408:3001.0003: input,hidraw0: USB HID v1.10 Device [Acer T231H] on usb-xhci-hcd.1-2/input0 [ 3.773454] logitech-djreceiver 0003:046D:C534.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0-2/input1 [ 3.861793] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1 [ 3.872240] input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/0003:046D:4023.0004/input/input13 [ 3.890270] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2 [ 3.985247] hid-generic 0003:046D:4023.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-xhci-hcd.0-2/input1:1 [ 4.021921] input: Logitech Wireless Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/0003:046D:4054.0005/input/input18 [ 4.193269] logitech-hidpp-device 0003:046D:4054.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-xhci-hcd.0-2/input1:2 [ 4.229922] input: Logitech Wireless Keyboard PID:4023 as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/0003:046D:4023.0004/input/input19 [ 4.325837] logitech-hidpp-device 0003:046D:4054.0005: HID++ 4.5 device connected. [ 4.341220] logitech-hidpp-device 0003:046D:4023.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-xhci-hcd.0-2/input1:1 [ 4.447436] EXT4-fs (mmcblk0p2): mounted filesystem 7de846e5-f05a-4a3e-a95b-cb4e344a1d8c ro with ordered data mode. Quota mode: none. [ 4.796019] NET: Registered PF_INET6 protocol family [ 4.801328] Segment Routing with IPv6 [ 4.805014] In-situ OAM (IOAM) with IPv6 [ 4.842192] systemd[1]: systemd 252.39-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 4.875076] systemd[1]: Detected architecture arm64. [ 4.887920] systemd[1]: Hostname set to . [ 5.240236] systemd[1]: multi-user.target: Found ordering cycle on patchbox-vnc.target/start [ 5.248740] systemd[1]: multi-user.target: Found dependency on patchbox-rpi-compat-graphical.service/start [ 5.258452] systemd[1]: multi-user.target: Found dependency on graphical.target/verify-active [ 5.267020] systemd[1]: multi-user.target: Found dependency on multi-user.target/start [ 5.274993] systemd[1]: multi-user.target: Job patchbox-vnc.target/start deleted to break ordering cycle starting with multi-user.target/start [ 5.288409] systemd[1]: Queued start job for default target graphical.target. [ 5.325616] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 5.333190] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 5.344123] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 5.355833] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 5.367441] systemd[1]: Created slice user.slice - User and Session Slice. [ 5.377183] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 5.390599] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 5.405932] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-f4d2a12c\x2d01.device - /dev/disk/by-partuuid/f4d2a12c-01... [ 5.420140] systemd[1]: Expecting device dev-dri-card0.device - /dev/dri/card0... [ 5.430523] systemd[1]: Expecting device dev-dri-renderD128.device - /dev/dri/renderD128... [ 5.441783] systemd[1]: Expecting device dev-ttyAMA10.device - /dev/ttyAMA10... [ 5.452017] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 5.463804] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 5.475138] systemd[1]: Reached target slices.target - Slice Units. [ 5.484299] systemd[1]: Reached target swap.target - Swaps. [ 5.492767] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 5.504144] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 5.515675] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 5.527503] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 5.538503] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 5.550308] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 5.561279] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 5.572780] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 5.583667] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 5.617244] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 5.628062] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 5.638697] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 5.649052] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). [ 5.650951] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... [ 5.679781] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 5.692617] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 5.706298] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 5.718956] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 5.730953] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 5.731330] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 5.755259] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 5.768280] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 5.780122] fuse: init (API version 7.41) [ 5.780422] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 5.799695] systemd[1]: Starting patchbox-rpi-compat-early.service - Patchbox OS conditional paths service for compatibility between Pi models.... [ 5.815174] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 5.834858] systemd[1]: Starting systemd-journald.service - Journal Service... [ 5.848657] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 5.860471] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 5.874504] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 5.887343] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 5.898327] systemd[1]: Started systemd-journald.service - Journal Service. [ 6.084902] EXT4-fs (mmcblk0p2): re-mounted 7de846e5-f05a-4a3e-a95b-cb4e344a1d8c r/w. [ 6.137551] systemd-journald[341]: Received client request to flush runtime journal. [ 12.410301] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 [ 12.411959] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 [ 12.412754] rp1-firmware rp1_firmware: RP1 Firmware version 23fca1cd776798b50bd3e640ecb242215778e7f8 [ 12.412882] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 [ 12.412901] rp1-pio 1f00178000.pio: Created instance as pio0 [ 12.413217] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 [ 12.413248] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 [ 12.414470] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 [ 12.414516] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 [ 12.414701] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 [ 12.414807] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 [ 12.414860] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 [ 12.443083] mc: Linux media interface: v0.10 [ 12.487940] videodev: Linux video capture interface: v2.00 [ 12.542775] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu [ 12.542782] pispbe 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu [ 12.542787] pispbe 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu [ 12.542792] pispbe 1000880000.pisp_be: Adding to iommu group 0 [ 12.542795] pispbe 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu [ 12.550902] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu [ 12.550910] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu [ 12.550915] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu [ 12.550920] rpi-hevc-dec 1000800000.codec: Adding to iommu group 0 [ 12.550922] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu [ 12.553482] rpi-hevc-dec 1000800000.codec: Device registered as /dev/video19 [ 12.632884] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.641093] Bluetooth: Core ver 2.22 [ 12.641391] NET: Registered PF_BLUETOOTH protocol family [ 12.641394] Bluetooth: HCI device and connection manager initialized [ 12.641401] Bluetooth: HCI socket layer initialized [ 12.641403] Bluetooth: L2CAP socket layer initialized [ 12.641409] Bluetooth: SCO socket layer initialized [ 12.643221] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 12.643423] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 12.643614] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 12.643803] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 12.653917] Bluetooth: HCI UART driver ver 2.3 [ 12.653924] Bluetooth: HCI UART protocol H4 registered [ 12.653949] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 12.654060] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 12.655666] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 12.655827] Bluetooth: HCI UART protocol Broadcom registered [ 12.676438] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 12.679009] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 12.680128] usbcore: registered new interface driver brcmfmac [ 12.900240] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) [ 12.900504] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID 01-b677b91b [ 13.005589] Bluetooth: hci0: BCM: chip id 107 [ 13.005792] Bluetooth: hci0: BCM: features 0x2f [ 13.006831] Bluetooth: hci0: BCM4345C0 [ 13.006833] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 [ 13.016367] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch [ 13.465035] export_store: invalid GPIO 17 [ 13.705815] Bluetooth: hci0: BCM: features 0x2f [ 13.707137] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190 [ 13.707139] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382 [ 13.707424] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac) [ 14.058092] Adding 204784k swap on /var/swap. Priority:-2 extents:15 across:15802368k SS [ 14.347207] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.347215] Bluetooth: BNEP filters: protocol multicast [ 14.347220] Bluetooth: BNEP socket layer initialized [ 14.348522] Bluetooth: MGMT ver 1.23 [ 14.355394] NET: Registered PF_ALG protocol family [ 19.146828] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) [ 19.146836] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode [ 19.149625] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered. [ 19.158087] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 23.255084] macb 1f00100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 24.386356] Bluetooth: RFCOMM TTY layer initialized [ 24.386371] Bluetooth: RFCOMM socket layer initialized [ 24.386380] Bluetooth: RFCOMM ver 1.11 [ 25.842888] ieee80211 phy0: brcmf_vif_set_mgmt_ie: vndr ie set error : -52 [ 26.340565] warning: `iwconfig' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 32.693172] ieee80211 phy0: brcmf_escan_timeout: timer expired [ 59.241212] logitech-hidpp-device 0003:046D:4023.0004: HID++ 2.0 device connected.