ed@raspberrypi:~ $ dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] [ 0.000000] Linux version 6.12.47+rpt-rpi-2712 (serge@raspberrypi.com) (aarch64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT Debian 1:6.12.47-1+rpt1 (2025-09-16) [ 0.000000] KASLR enabled [ 0.000000] random: crng init done [ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000003a000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x000000003a000000..0x000000003dffffff (65536 KiB) map reusable linux,cma [ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0 [ 0.000000] OF: reserved mem: 0x000000003fd235c0..0x000000003fd235f7 (0 KiB) nomap non-reusable nvram@0 [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] Faking node 0 at [mem 0x0000000000000000-0x000000003fffffff] (1024MB) [ 0.000000] Faking node 1 at [mem 0x0000000040000000-0x000000007fffffff] (1024MB) [ 0.000000] Faking node 2 at [mem 0x0000000080000000-0x00000000bfffffff] (1024MB) [ 0.000000] Faking node 3 at [mem 0x00000000c0000000-0x00000000ffffffff] (1024MB) [ 0.000000] Faking node 4 at [mem 0x0000000100000000-0x000000013fffffff] (1024MB) [ 0.000000] Faking node 5 at [mem 0x0000000140000000-0x000000017fffffff] (1024MB) [ 0.000000] Faking node 6 at [mem 0x0000000180000000-0x00000001bfffffff] (1024MB) [ 0.000000] Faking node 7 at [mem 0x00000001c0000000-0x00000001ffffffff] (1024MB) [ 0.000000] NUMA: Initialized distance table, cnt=8 [ 0.000000] NODE_DATA(0) allocated [mem 0x3f7fd200-0x3f7fffff] [ 0.000000] NODE_DATA(1) allocated [mem 0x7fffd200-0x7fffffff] [ 0.000000] NODE_DATA(2) allocated [mem 0xbfffd200-0xbfffffff] [ 0.000000] NODE_DATA(3) allocated [mem 0xffffd200-0xffffffff] [ 0.000000] NODE_DATA(4) allocated [mem 0x13fffd200-0x13fffffff] [ 0.000000] NODE_DATA(5) allocated [mem 0x17fffd200-0x17fffffff] [ 0.000000] NODE_DATA(6) allocated [mem 0x1bfffd200-0x1bfffffff] [ 0.000000] NODE_DATA(7) allocated [mem 0x1ffb99200-0x1ffb9bfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] [ 0.000000] node 0: [mem 0x0000000000080000-0x000000003f7fffff] [ 0.000000] node 1: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] node 2: [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] node 3: [mem 0x00000000c0000000-0x00000000ffffffff] [ 0.000000] node 4: [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] node 5: [mem 0x0000000140000000-0x000000017fffffff] [ 0.000000] node 6: [mem 0x0000000180000000-0x00000001bfffffff] [ 0.000000] node 7: [mem 0x00000001c0000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003f7fffff] [ 0.000000] Initmem setup node 1 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 2 [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 3 [mem 0x00000000c0000000-0x00000000ffffffff] [ 0.000000] Initmem setup node 4 [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Initmem setup node 5 [mem 0x0000000140000000-0x000000017fffffff] [ 0.000000] Initmem setup node 6 [mem 0x0000000180000000-0x00000001bfffffff] [ 0.000000] Initmem setup node 7 [mem 0x00000001c0000000-0x00000001ffffffff] [ 0.000000] On node 1, zone DMA: 512 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 15 pages/cpu s193560 r8192 d44008 u245760 [ 0.000000] pcpu-alloc: s193560 r8192 d44008 u245760 alloc=15*16384 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: SSBS not fully self-synchronizing [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=2C:CF:67:32:DC:7E vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=85f4528f-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=AT [ 0.000000] cgroup: Disabling memory control group subsystem [ 0.000000] mempolicy: NUMA default policy overridden to 'interleave:0-7' [ 0.000000] DMA IOMMU NUMA default policy overridden to 'interleave:0-7' [ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space. [ 0.000000] Fallback order for Node 0: 0 1 2 3 4 5 6 7 [ 0.000000] Fallback order for Node 1: 1 2 3 4 5 6 7 0 [ 0.000000] Fallback order for Node 2: 2 3 4 5 6 7 0 1 [ 0.000000] Fallback order for Node 3: 3 4 5 6 7 0 1 2 [ 0.000000] Fallback order for Node 4: 4 5 6 7 0 1 2 3 [ 0.000000] Fallback order for Node 5: 5 6 7 0 1 2 3 4 [ 0.000000] Fallback order for Node 6: 6 7 0 1 2 3 4 5 [ 0.000000] Fallback order for Node 7: 7 0 1 2 3 4 5 6 [ 0.000000] Built 8 zonelists, mobility grouping on. Total pages: 523776 [ 0.000000] Policy zone: Normal [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=8 [ 0.000000] ftrace: allocating 45279 entries in 45 pages [ 0.000000] ftrace: allocated 45 pages with 4 groups [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000091] Console: colour dummy device 80x25 [ 0.000094] printk: legacy console [tty1] enabled [ 0.000165] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.000169] pid_max: default: 32768 minimum: 301 [ 0.000258] LSM: initializing lsm=capability [ 0.001734] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, vmalloc) [ 0.002461] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, vmalloc) [ 0.002506] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, vmalloc) [ 0.002526] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, vmalloc) [ 0.003234] rcu: Hierarchical SRCU implementation. [ 0.003239] rcu: Max phase no-delay instances is 1000. [ 0.003279] Timer migration: 1 hierarchy levels; 8 children per group; 0 crossnode level [ 0.003602] EFI services will not be available. [ 0.003666] smp: Bringing up secondary CPUs ... [ 0.003849] Detected PIPT I-cache on CPU1 [ 0.003883] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] [ 0.004124] Detected PIPT I-cache on CPU2 [ 0.004150] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] [ 0.004336] Detected PIPT I-cache on CPU3 [ 0.004354] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] [ 0.004382] smp: Brought up 8 nodes, 4 CPUs [ 0.004387] SMP: Total of 4 processors activated. [ 0.004388] CPU: All CPU(s) started at EL2 [ 0.004391] CPU features: detected: 32-bit EL0 Support [ 0.004392] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.004394] CPU features: detected: Common not Private translations [ 0.004396] CPU features: detected: CRC32 instructions [ 0.004398] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.004400] CPU features: detected: LSE atomic instructions [ 0.004401] CPU features: detected: Privileged Access Never [ 0.004402] CPU features: detected: RAS Extension Support [ 0.004403] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.004426] alternatives: applying system-wide alternatives [ 0.005824] CPU features: detected: Hardware dirty bit management on CPU0-3 [ 0.005998] Memory: 8136240K/8380416K available (14336K kernel code, 2418K rwdata, 4944K rodata, 2304K init, 647K bss, 152112K reserved, 65536K cma-reserved) [ 0.006164] devtmpfs: initialized [ 0.008032] Enabled cp15_barrier support [ 0.008037] Enabled setend support [ 0.008076] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.008081] futex hash table entries: 1024 (order: 2, 65536 bytes, vmalloc) [ 0.008194] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL [ 0.008196] 0 pages in range for non-PLT usage [ 0.008197] 129508 pages in range for PLT usage [ 0.008276] pinctrl core: initialized pinctrl subsystem [ 0.008392] DMI not present or invalid. [ 0.011362] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.011690] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.011718] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.011747] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.011760] audit: initializing netlink subsys (disabled) [ 0.011816] audit: type=2000 audit(0.000:1): state=initialized audit_enabled=0 res=1 [ 0.011915] thermal_sys: Registered thermal governor 'step_wise' [ 0.011925] cpuidle: using governor menu [ 0.011978] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.012006] ASID allocator initialised with 32768 entries [ 0.012212] Serial: AMBA PL011 UART driver [ 0.012947] /soc@107c000000/interrupt-controller@7fff9000: Fixed dependency cycle(s) with /soc@107c000000/interrupt-controller@7fff9000 [ 0.013096] bcm2835-mbox 107c013880.mailbox: mailbox enabled [ 0.013221] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 16, base_baud = 0) is a PL011 rev3 [ 0.013230] printk: legacy console [ttyAMA10] enabled [ 0.020012] raspberrypi-firmware soc@107c000000:firmware: Attached to firmware from 2025-12-08T19:29:54, variant start_cd [ 0.024011] raspberrypi-firmware soc@107c000000:firmware: Firmware hash is 2226a85300000000000000000000000000000000 [ 0.032486] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 [ 0.032730] iommu: Default domain type: Translated [ 0.032732] iommu: DMA domain TLB invalidation policy: strict mode [ 0.033003] SCSI subsystem initialized [ 0.033033] usbcore: registered new interface driver usbfs [ 0.033039] usbcore: registered new interface driver hub [ 0.033046] usbcore: registered new device driver usb [ 0.033111] pps_core: LinuxPPS API ver. 1 registered [ 0.033113] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.033116] PTP clock support registered [ 0.035901] vgaarb: loaded [ 0.036001] clocksource: Switched to clocksource arch_sys_counter [ 0.036149] VFS: Disk quotas dquot_6.6.0 [ 0.036156] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) [ 0.037220] NET: Registered PF_INET protocol family [ 0.037413] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, vmalloc) [ 0.039027] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, vmalloc) [ 0.039054] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, vmalloc) [ 0.039062] TCP established hash table entries: 65536 (order: 5, 524288 bytes, vmalloc) [ 0.039264] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, vmalloc) [ 0.039985] TCP: Hash tables configured (established 65536 bind 65536) [ 0.040103] MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, vmalloc) [ 0.040142] UDP hash table entries: 4096 (order: 3, 131072 bytes, vmalloc) [ 0.040206] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, vmalloc) [ 0.040304] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.040445] RPC: Registered named UNIX socket transport module. [ 0.040447] RPC: Registered udp transport module. [ 0.040448] RPC: Registered tcp transport module. [ 0.040449] RPC: Registered tcp-with-tls transport module. [ 0.040450] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.040455] PCI: CLS 0 bytes, default 64 [ 0.040564] Trying to unpack rootfs image as initramfs... [ 0.044955] kvm [1]: nv: 554 coarse grained trap handlers [ 0.045032] kvm [1]: IPA Size Limit: 40 bits [ 0.045041] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance) [ 0.045063] kvm [1]: vgic interrupt IRQ9 [ 0.045073] kvm [1]: VHE mode initialized successfully [ 0.195584] Freeing initrd memory: 21808K [ 0.210555] Initialise system trusted keyrings [ 0.210884] workingset: timestamp_bits=42 max_order=19 bucket_order=0 [ 0.211226] NFS: Registering the id_resolver key type [ 0.211235] Key type id_resolver registered [ 0.211236] Key type id_legacy registered [ 0.211246] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.211248] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.211421] Key type asymmetric registered [ 0.211424] Asymmetric key parser 'x509' registered [ 0.211445] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.211478] io scheduler mq-deadline registered [ 0.211480] io scheduler kyber registered [ 0.211493] io scheduler bfq registered [ 0.211818] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7d510600, parent irq: 27) [ 0.211849] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7c502000, parent irq: 28) [ 0.211876] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d508380, parent irq: 29) [ 0.211907] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d508400, parent irq: 30) [ 0.211932] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d503000, parent irq: 31) [ 0.212811] ledtrig-cpu: registered to indicate activity on CPUs [ 0.213229] simple-framebuffer 3f800000.framebuffer: framebuffer at 0x3f800000, 0x3f4800 bytes [ 0.213234] simple-framebuffer 3f800000.framebuffer: format=r5g6b5, mode=1920x1080x16, linelength=3840 [ 0.215194] Console: switching to colour frame buffer device 240x67 [ 0.216147] simple-framebuffer 3f800000.framebuffer: fb0: simplefb registered! [ 0.245425] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 0.245727] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 33, base_baud = 6000000) is a Broadcom BCM7271 UART [ 0.245766] serial serial0: tty port ttyS0 registered [ 0.246001] iproc-rng200 107d208000.rng: hwrng registered [ 0.246029] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) [ 0.246205] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe [ 0.247493] brd: module loaded [ 0.248377] loop: module loaded [ 0.248462] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 0.248561] Loading iSCSI transport class v2.0-870. [ 0.249202] usbcore: registered new interface driver lan78xx [ 0.249210] usbcore: registered new interface driver smsc95xx [ 0.249251] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.249265] dwc_otg: FIQ enabled [ 0.249267] dwc_otg: NAK holdoff enabled [ 0.249268] dwc_otg: FIQ split-transaction FSM enabled [ 0.249270] Module dwc_common_port init [ 0.249449] usbcore: registered new interface driver uas [ 0.249457] usbcore: registered new interface driver usb-storage [ 0.249514] mousedev: PS/2 mouse device common for all mice [ 0.257007] rpi-rtc soc@107c000000:rpi_rtc: registered as rtc0 [ 0.258387] rpi-rtc soc@107c000000:rpi_rtc: setting system clock to 1970-01-01T00:00:10 UTC (10) [ 0.258662] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! [ 0.258664] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.260649] sdhci: Secure Digital Host Controller Interface driver [ 0.260651] sdhci: Copyright(c) Pierre Ossman [ 0.260677] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.260736] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.260744] hid: raw HID events driver (C) Jiri Kosina [ 0.260765] usbcore: registered new interface driver usbhid [ 0.260766] usbhid: USB HID core driver [ 0.261024] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 (0,8000003f) counters available [ 0.261226] NET: Registered PF_PACKET protocol family [ 0.261245] Key type dns_resolver registered [ 0.264619] registered taskstats version 1 [ 0.264676] Loading compiled-in X.509 certificates [ 0.266080] Demotion targets for Node 0: null [ 0.266083] Demotion targets for Node 1: null [ 0.266084] Demotion targets for Node 2: null [ 0.266085] Demotion targets for Node 3: null [ 0.266086] Demotion targets for Node 4: null [ 0.266087] Demotion targets for Node 5: null [ 0.266088] Demotion targets for Node 6: null [ 0.266089] Demotion targets for Node 7: null [ 0.266248] Key type .fscrypt registered [ 0.266249] Key type fscrypt-provisioning registered [ 0.267043] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@1000120000 ranges: [ 0.267048] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@1000120000, using [bus 00-ff] [ 0.267055] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 [ 0.267059] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 [ 0.267064] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 [ 0.267068] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 [ 0.267072] brcm-pcie 1000120000.pcie: IB MEM 0x1000130000..0x1000130fff -> 0xfffffff000 [ 0.268392] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0002:00 [ 0.268395] pci_bus 0002:00: root bus resource [bus 00-ff] [ 0.268398] pci_bus 0002:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) [ 0.268401] pci_bus 0002:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) [ 0.268412] pci 0002:00:00.0: [14e4:2712] type 01 class 0x060400 PCIe Root Port [ 0.268417] pci 0002:00:00.0: PCI bridge to [bus 00] [ 0.268420] pci 0002:00:00.0: bridge window [mem 0x1f80000000-0x1fbfffffff] [ 0.268436] pci 0002:00:00.0: PME# supported from D0 D3hot [ 0.268975] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.372006] brcm-pcie 1000120000.pcie: clkreq-mode set to default [ 0.372009] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) [ 0.372031] pci 0002:01:00.0: [1de4:0001] type 00 class 0x020000 PCIe Endpoint [ 0.372045] pci 0002:01:00.0: BAR 0 [mem 0xffffc000-0xffffffff] [ 0.372052] pci 0002:01:00.0: BAR 1 [mem 0xffc00000-0xffffffff] [ 0.372057] pci 0002:01:00.0: BAR 2 [mem 0xffff0000-0xffffffff] [ 0.372122] pci 0002:01:00.0: supports D1 [ 0.372124] pci 0002:01:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.380009] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.380018] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]: assigned [ 0.380020] pci 0002:01:00.0: BAR 1 [mem 0x1f00000000-0x1f003fffff]: assigned [ 0.380024] pci 0002:01:00.0: BAR 2 [mem 0x1f00400000-0x1f0040ffff]: assigned [ 0.380028] pci 0002:01:00.0: BAR 0 [mem 0x1f00410000-0x1f00413fff]: assigned [ 0.380032] pci 0002:00:00.0: PCI bridge to [bus 01] [ 0.380035] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] [ 0.380037] pci_bus 0002:00: resource 4 [mem 0x1f00000000-0x1ffffffffb] [ 0.380039] pci_bus 0002:00: resource 5 [mem 0x1c00000000-0x1effffffff pref] [ 0.380041] pci_bus 0002:01: resource 1 [mem 0x1f00000000-0x1f005fffff] [ 0.380045] pci 0002:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 0.380052] pci 0002:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 [ 0.380107] pcieport 0002:00:00.0: enabling device (0000 -> 0002) [ 0.380141] pcieport 0002:00:00.0: PME: Signaling with IRQ 38 [ 0.380183] pcieport 0002:00:00.0: AER: enabled with IRQ 38 [ 0.380240] rp1 0002:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 [ 0.380243] rp1 0002:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 [ 0.380253] rp1 0002:01:00.0: enabling device (0000 -> 0002) [ 0.380854] rp1 0002:01:00.0: chip_id 0x20001927 [ 0.385550] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 0.385965] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success [ 0.386425] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 0.386811] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success [ 0.387245] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 0.387639] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success [ 0.387771] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO [ 0.387855] mmc0: CQHCI version 5.10 [ 0.388196] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 100 [ 0.388238] mmc1: CQHCI version 5.10 [ 0.403338] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 106 (2c:cf:67:32:dc:7e) [ 0.404075] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels [ 0.404286] xhci-hcd xhci-hcd.0: xHCI Host Controller [ 0.404291] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 [ 0.404724] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000808000000810 [ 0.404732] xhci-hcd xhci-hcd.0: irq 131, io mem 0x1f00200000 [ 0.404790] xhci-hcd xhci-hcd.0: xHCI Host Controller [ 0.404793] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 [ 0.404795] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed [ 0.404832] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 0.404834] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.404837] usb usb1: Product: xHCI Host Controller [ 0.404838] usb usb1: Manufacturer: Linux 6.12.47+rpt-rpi-2712 xhci-hcd [ 0.404840] usb usb1: SerialNumber: xhci-hcd.0 [ 0.404940] hub 1-0:1.0: USB hub found [ 0.404952] hub 1-0:1.0: 2 ports detected [ 0.405051] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 0.405053] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.405055] usb usb2: Product: xHCI Host Controller [ 0.405057] usb usb2: Manufacturer: Linux 6.12.47+rpt-rpi-2712 xhci-hcd [ 0.405058] usb usb2: SerialNumber: xhci-hcd.0 [ 0.405117] hub 2-0:1.0: USB hub found [ 0.405126] hub 2-0:1.0: 1 port detected [ 0.405324] xhci-hcd xhci-hcd.1: xHCI Host Controller [ 0.405327] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 [ 0.405760] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000808000000810 [ 0.405767] xhci-hcd xhci-hcd.1: irq 136, io mem 0x1f00300000 [ 0.405822] xhci-hcd xhci-hcd.1: xHCI Host Controller [ 0.405824] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 [ 0.405826] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed [ 0.405851] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 0.405853] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.405855] usb usb3: Product: xHCI Host Controller [ 0.405856] usb usb3: Manufacturer: Linux 6.12.47+rpt-rpi-2712 xhci-hcd [ 0.405858] usb usb3: SerialNumber: xhci-hcd.1 [ 0.405918] hub 3-0:1.0: USB hub found [ 0.405929] hub 3-0:1.0: 2 ports detected [ 0.406011] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 0.406013] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.406015] usb usb4: Product: xHCI Host Controller [ 0.406017] usb usb4: Manufacturer: Linux 6.12.47+rpt-rpi-2712 xhci-hcd [ 0.406018] usb usb4: SerialNumber: xhci-hcd.1 [ 0.406077] hub 4-0:1.0: USB hub found [ 0.406087] hub 4-0:1.0: 1 port detected [ 0.406639] of_cfs_init [ 0.406691] of_cfs_init: OK [ 0.406839] clk: Disabling unused clocks [ 0.415423] PM: genpd: Disabling unused power domains [ 0.420005] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit [ 0.520756] mmc0: new ultra high speed SDR104 SDXC card at address 59b4 [ 0.520904] mmcblk0: mmc0:59b4 SD64G 59.4 GiB [ 0.521894] mmcblk0: p1 p2 [ 0.521953] mmcblk0: mmc0:59b4 SD64G 59.4 GiB (quirks 0x00004000) [ 0.574539] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit [ 0.575681] Freeing unused kernel memory: 2304K [ 0.575754] Run /init as init process [ 0.575756] with arguments: [ 0.575758] /init [ 0.575759] splash [ 0.575760] with environment: [ 0.575761] HOME=/ [ 0.575762] TERM=linux [ 0.605350] mmc1: new ultra high speed DDR50 SDIO card at address 0001 [ 0.652034] usb 3-2: new full-speed USB device number 2 using xhci-hcd [ 0.652057] usb 1-2: new full-speed USB device number 2 using xhci-hcd [ 0.673226] rp1-firmware rp1_firmware: RP1 Firmware version 23fca1cd776798b50bd3e640ecb242215778e7f8 [ 0.687600] input: pwr_button as /devices/platform/pwr_button/input/input0 [ 0.691851] brcmstb-i2c 107d508200.i2c: @97500hz registered in interrupt mode [ 0.693155] rp1-pio 1f00178000.pio: Created instance as pio0 [ 0.700896] brcmstb-i2c 107d508280.i2c: @97500hz registered in interrupt mode [ 0.742377] v3d 1002000000.v3d: [drm] Transparent Hugepage support is recommended for optimal performance on this platform! [ 0.742800] [drm] Initialized v3d 1.0.0 for 1002000000.v3d on minor 0 [ 0.746443] vc4_hvs 107c580000.hvs: bcm2712_iommu_of_xlate: MMU 1000005200.iommu [ 0.746454] vc4_hvs 107c580000.hvs: bcm2712_iommu_probe_device: MMU 1000005200.iommu [ 0.746460] vc4_hvs 107c580000.hvs: bcm2712_iommu_device_group: MMU 1000005200.iommu [ 0.746466] vc4_hvs 107c580000.hvs: Adding to iommu group 1 [ 0.746470] vc4_hvs 107c580000.hvs: bcm2712_iommu_attach_dev: MMU 1000005200.iommu [ 0.747669] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu [ 0.747675] vc4-drm axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu [ 0.747680] vc4-drm axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu [ 0.747685] vc4-drm axi:gpu: Adding to iommu group 1 [ 0.747687] vc4-drm axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu [ 0.748757] Console: switching to colour dummy device 80x25 [ 0.751116] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4]) [ 0.752255] Registered IR keymap rc-cec [ 0.752289] rc rc0: vc4-hdmi-0 as /devices/platform/soc@107c000000/107c701400.hdmi/rc/rc0 [ 0.752331] input: vc4-hdmi-0 as /devices/platform/soc@107c000000/107c701400.hdmi/rc/rc0/input1 [ 0.753489] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc@107c000000/107c701400.hdmi/sound/card0/input2 [ 0.754426] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4]) [ 0.755555] Registered IR keymap rc-cec [ 0.755581] rc rc1: vc4-hdmi-1 as /devices/platform/soc@107c000000/107c706400.hdmi/rc/rc1 [ 0.755621] input: vc4-hdmi-1 as /devices/platform/soc@107c000000/107c706400.hdmi/rc/rc1/input3 [ 0.756373] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc@107c000000/107c706400.hdmi/sound/card1/input4 [ 0.757284] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4]) [ 0.757382] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4]) [ 0.757432] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4]) [ 0.757475] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 0.757512] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 0.806800] [drm] Initialized vc4 0.0.0 for axi:gpu on minor 1 [ 0.830861] usb 1-2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 0.830865] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 0.830868] usb 1-2: Product: USB Receiver [ 0.830869] usb 1-2: Manufacturer: Logitech [ 0.872041] input: Logitech USB Receiver as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.0/0003:046D:C534.0001/input/input5 [ 0.882824] Console: switching to colour frame buffer device 240x67 [ 0.900489] vc4-drm axi:gpu: [drm] fb0: vc4drmfb frame buffer device [ 0.905896] usb 3-2: New USB device found, idVendor=0408, idProduct=3001, bcdDevice= 0.04 [ 0.905901] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 0.905903] usb 3-2: Product: T231H [ 0.905904] usb 3-2: Manufacturer: Acer [ 0.956295] input: Acer T231H as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.0/0003:0408:3001.0002/input/input6 [ 1.012075] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0-2/input0 [ 1.012195] hid-generic 0003:0408:3001.0002: input,hidraw1: USB HID v1.10 Device [Acer T231H] on usb-xhci-hcd.1-2/input0 [ 1.044860] input: Logitech USB Receiver Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0003/input/input7 [ 1.044944] input: Logitech USB Receiver Consumer Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0003/input/input8 [ 1.047975] input: Acer T231H as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.0/0003:0408:3001.0002/input/input12 [ 1.100049] input: Logitech USB Receiver System Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0003/input/input9 [ 1.100129] hid-multitouch 0003:0408:3001.0002: input,hidraw1: USB HID v1.10 Device [Acer T231H] on usb-xhci-hcd.1-2/input0 [ 1.100179] hid-generic 0003:046D:C534.0003: input,hiddev96,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0-2/input1 [ 1.296184] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0-2/input0 [ 1.496225] logitech-djreceiver 0003:046D:C534.0003: hiddev96,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0-2/input1 [ 1.556924] logitech-djreceiver 0003:046D:C534.0003: device of type eQUAD nano Lite (0x0a) connected on slot 1 [ 1.557890] input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0003/0003:046D:4023.0004/input/input13 [ 1.572925] logitech-djreceiver 0003:046D:C534.0003: device of type eQUAD nano Lite (0x0a) connected on slot 2 [ 1.652076] hid-generic 0003:046D:4023.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-xhci-hcd.0-2/input1:1 [ 1.685081] input: Logitech Wireless Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0003/0003:046D:4054.0005/input/input18 [ 1.685250] logitech-hidpp-device 0003:046D:4054.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-xhci-hcd.0-2/input1:2 [ 1.909051] input: Logitech Wireless Keyboard PID:4023 as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0003/0003:046D:4023.0004/input/input19 [ 2.004045] logitech-hidpp-device 0003:046D:4023.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-xhci-hcd.0-2/input1:1 [ 2.391580] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [ 2.392315] EXT4-fs (mmcblk0p2): mounted filesystem 411ca88c-4698-460c-8691-dbeb5c6c14bf ro with ordered data mode. Quota mode: none. [ 2.633125] systemd[1]: System time advanced to timestamp on /var/lib/systemd/timesync/clock: Thu 2025-12-18 16:20:21 CET [ 2.683445] NET: Registered PF_INET6 protocol family [ 2.683760] Segment Routing with IPv6 [ 2.683768] In-situ OAM (IOAM) with IPv6 [ 2.712976] systemd[1]: systemd 257.9-1~deb13u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE) [ 2.712983] systemd[1]: Detected architecture arm64. [ 2.716542] systemd[1]: Hostname set to . [ 2.818038] systemd[1]: bpf-restrict-fs: BPF LSM hook not enabled in the kernel, BPF LSM not supported. [ 2.818186] systemd[1]: Using hardware watchdog 'Broadcom BCM2835 Watchdog timer', version 0, device /dev/watchdog0 [ 2.818195] systemd[1]: Watchdog running with a hardware timeout of 1min. [ 2.891627] zram_generator::config[260]: zram0: system has too much memory (8059MB), limit is 0MB, ignoring. [ 3.378414] systemd[1]: Queued start job for default target graphical.target. [ 3.404913] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 3.405211] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 3.405430] systemd[1]: Created slice system-rpi\x2dsetup\x2dloop.slice - Slice /system/rpi-setup-loop. [ 3.405644] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 3.405853] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 3.406068] systemd[1]: Created slice system-systemd\x2dzram\x2dsetup.slice - Slice /system/systemd-zram-setup. [ 3.406174] systemd[1]: Created slice user.slice - User and Session Slice. [ 3.406231] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 3.406390] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 3.406417] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-85f4528f\x2d01.device - /dev/disk/by-partuuid/85f4528f-01... [ 3.406425] systemd[1]: Expecting device dev-dri-card0.device - /dev/dri/card0... [ 3.406433] systemd[1]: Expecting device dev-dri-renderD128.device - /dev/dri/renderD128... [ 3.406438] systemd[1]: Expecting device dev-ttyAMA10.device - /dev/ttyAMA10... [ 3.406446] systemd[1]: Expecting device dev-zram0.device - /dev/zram0... [ 3.406487] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 3.406511] systemd[1]: Reached target slices.target - Slice Units. [ 3.409020] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. [ 3.410393] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption. [ 3.410473] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 3.410542] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 3.410629] systemd[1]: Listening on systemd-journald.socket - Journal Sockets. [ 3.410663] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 3.410677] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 3.410738] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 3.410794] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 3.410901] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 3.412567] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 3.413200] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock... [ 3.413660] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 3.414081] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 3.414166] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). [ 3.415790] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 3.420395] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 3.424353] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 3.426824] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 3.432525] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 3.434762] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 3.434925] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 3.434970] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). [ 3.439501] systemd[1]: Starting systemd-journald.service - Journal Service... [ 3.450345] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 3.450370] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 3.451639] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 3.451709] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 3.453117] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials... [ 3.454822] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 3.461745] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 3.461858] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock. [ 3.461931] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 3.461996] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 3.462166] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 3.462423] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 3.462607] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 3.462931] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 3.463026] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 3.466155] fuse: init (API version 7.41) [ 3.467275] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 3.468543] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 3.469391] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 3.470136] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 3.471563] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 3.472125] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 3.472289] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 3.480270] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 3.482200] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 3.513131] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials. [ 3.516171] systemd-journald[341]: Collecting audit messages is disabled. [ 3.524071] EXT4-fs (mmcblk0p2): re-mounted 411ca88c-4698-460c-8691-dbeb5c6c14bf r/w. [ 3.525186] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 3.526340] systemd[1]: Starting cloud-init-main.service - Cloud-init: Single Process... [ 3.526366] systemd[1]: regenerate_ssh_host_keys.service - Regenerate SSH host keys was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 3.528116] zram: Added device: zram0 [ 3.531363] i2c_dev: i2c /dev entries driver [ 3.536623] systemd[1]: Starting rpi-resize-swap-file.service - rpi-resize-var-swap-service - resize swapfile... [ 3.538127] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc). [ 3.538196] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 3.558901] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed... [ 3.558943] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 3.559228] systemd[1]: Started systemd-journald.service - Journal Service. [ 3.603518] systemd-journald[341]: Received client request to flush runtime journal. [ 3.795821] loop0: detected capacity change from 0 to 4194304 [ 3.922355] zram: setup backing device /dev/disk/by-backingfile/var-swap [ 3.924219] zram0: detected capacity change from 0 to 4194304 [ 4.013411] Adding 2097136k swap on /dev/zram0. Priority:100 extents:1 across:2097136k SS [ 4.056544] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 [ 4.059944] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 [ 4.060413] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 [ 4.061282] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 [ 4.061393] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 [ 4.061584] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 [ 4.061668] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 [ 4.070055] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 [ 4.070312] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 [ 4.070392] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 [ 4.131649] mc: Linux media interface: v0.10 [ 4.170543] videodev: Linux video capture interface: v2.00 [ 4.244976] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu [ 4.244993] pispbe 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu [ 4.245003] pispbe 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu [ 4.245009] pispbe 1000880000.pisp_be: Adding to iommu group 0 [ 4.245015] pispbe 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu [ 4.264450] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu [ 4.264458] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu [ 4.264463] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu [ 4.264468] rpi-hevc-dec 1000800000.codec: Adding to iommu group 0 [ 4.264471] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu [ 4.283237] rpi-hevc-dec 1000800000.codec: Device registered as /dev/video19 [ 4.293992] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.299052] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 4.299249] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 4.299435] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.299618] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 4.353293] Bluetooth: Core ver 2.22 [ 4.353325] NET: Registered PF_BLUETOOTH protocol family [ 4.353327] Bluetooth: HCI device and connection manager initialized [ 4.353333] Bluetooth: HCI socket layer initialized [ 4.353336] Bluetooth: L2CAP socket layer initialized [ 4.353341] Bluetooth: SCO socket layer initialized [ 4.357253] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 4.362350] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 4.362556] usbcore: registered new interface driver brcmfmac [ 4.368183] Bluetooth: HCI UART driver ver 2.3 [ 4.368191] Bluetooth: HCI UART protocol H4 registered [ 4.368322] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 4.368524] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 4.368589] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 4.368693] Bluetooth: HCI UART protocol Broadcom registered [ 4.618353] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) [ 4.618970] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID 01-b677b91b [ 4.724440] Bluetooth: hci0: BCM: chip id 107 [ 4.724645] Bluetooth: hci0: BCM: features 0x2f [ 4.725707] Bluetooth: hci0: BCM4345C0 [ 4.725709] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 [ 4.726826] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch [ 5.424624] Bluetooth: hci0: BCM: features 0x2f [ 5.425942] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190 [ 5.425944] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382 [ 5.426225] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac) [ 5.632600] export_store: invalid GPIO 17 [ 5.759202] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.759210] Bluetooth: BNEP filters: protocol multicast [ 5.759216] Bluetooth: BNEP socket layer initialized [ 5.761199] Bluetooth: MGMT ver 1.23 [ 5.766931] NET: Registered PF_ALG protocol family [ 5.811453] Bluetooth: RFCOMM TTY layer initialized [ 5.811466] Bluetooth: RFCOMM socket layer initialized [ 5.811474] Bluetooth: RFCOMM ver 1.11 [ 6.817538] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) [ 6.817544] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode [ 6.820383] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered. [ 6.828120] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 10.922007] macb 1f00100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 5431.150270] logitech-hidpp-device 0003:046D:4054.0005: HID++ 4.5 device connected. [ 5443.311031] logitech-hidpp-device 0003:046D:4023.0004: HID++ 2.0 device connected. ed@raspberrypi:~ $