# Why choose SPI over UART?

**URL:** <https://community.blokas.io/t/why-choose-spi-over-uart/2559>\
**Category:** Pisound\
**Created:** [December 26, 2020, 9:14am UTC](https://community.blokas.io/t/why-choose-spi-over-uart/2559 "2020-12-26T09:14:59Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![DrKoma](https://community.blokas.io/user_avatar/community.blokas.io/drkoma/32/1703_2.png) [@DrKoma](https://community.blokas.io/u/DrKoma)\
**Post date:** [January 26, 2021, 2:37pm UTC](https://community.blokas.io/t/why-choose-spi-over-uart/2559/7 "2021-01-26T14:37:58Z")

</div>

```auto
ttymidi -s /dev/ttyAMA0 -b 38400 -v & 

```

starts midi ad 31250 baud rate if changes made to /boot/config & cmdline  
I was using aconnect then Puredata\_MidiOut:ttymidi in .  
a2jmidid I used it later to be able to have Midi clock messages ( I wasnt getting them with aconnect + ttymidi )

I run a2jmidid and then used pathbox’s midi ports UI to connect them between jack ports , pd jack out-\> ttymidi jack out

I will confirm them again here once I test again , now Im dealing with orac not wanting to behave and my OS getting super lag on ssh all of a sudden, but will report back

---

_[View the full topic](https://community.blokas.io/t/why-choose-spi-over-uart/2559)._
