Thanx you for your reply.
I squeezed the cards many times and rebooted but nothing changed.
The Power supply Is the original one from abox 5V 3A.
This Is the dmesg (really huge)
modep@modep:~ $ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.15.18-v7 (kedei@kedei-ThinkPad) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03)) #26 SMP Fri May 25 12:37:29 CST 2018
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x3ac00000
[ 0.000000] On node 0 totalpages: 242688
[ 0.000000] Normal zone: 2133 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 242688 pages, LIFO batch:31
[ 0.000000] random: fast init done
[ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s38528 r8192 d22912 u69632
[ 0.000000] pcpu-alloc: s38528 r8192 d22912 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555
[ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=9c17ba5a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 940264K/970752K available (7168K kernel code, 605K rwdata, 2092K rodata, 1024K init, 701K bss, 22296K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x(ptrval) - 0x(ptrval) (8160 kB)
.init : 0x(ptrval) - 0x(ptrval) (1024 kB)
.data : 0x(ptrval) - 0x(ptrval) ( 606 kB)
.bss : 0x(ptrval) - 0x(ptrval) ( 702 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 25553 entries in 75 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns[ 0.000022] Switching to timer-based delay loop, resolution 52ns
[ 0.000279] Console: colour dummy device 80x30
[ 0.000812] console [tty1] enabled
[ 0.000851] Calibrating delay loop (skipped), value calculated using timer frequency… 38.40 BogoMIPS (lpj=192000)
[ 0.000892] pid_max: default: 32768 minimum: 301
[ 0.001216] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001249] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002219] Disabling memory control group subsystem
[ 0.002319] CPU: Testing write buffer coherency: ok
[ 0.002758] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.003188] Setting up static identity map for 0x100000 - 0x10003c
[ 0.003334] Hierarchical SRCU implementation.
[ 0.004103] smp: Bringing up secondary CPUs …
[ 0.004860] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.005674] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.006471] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.006587] smp: Brought up 1 node, 4 CPUs
[ 0.006659] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.006680] CPU: All CPU(s) started in HYP mode.
[ 0.006699] CPU: Virtualization extensions available.
[ 0.007567] devtmpfs: initialized
[ 0.018771] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.019035] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.019079] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.019675] pinctrl core: initialized pinctrl subsystem
[ 0.020513] NET: Registered protocol family 16
[ 0.022593] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.027529] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.[ 0.027562] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.027756] Serial: AMBA PL011 UART driver
[ 0.029851] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.030426] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.064350] bcm2835-dma 3f007000.dma: DMA legacy API manager at 413b0418, dmachans=0x1
[ 0.065920] SCSI subsystem initialized
[ 0.066168] usbcore: registered new interface driver usbfs
[ 0.066246] usbcore: registered new interface driver hub
[ 0.066355] usbcore: registered new device driver usb
[ 0.070066] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-04 16:31
[ 0.071415] clocksource: Switched to clocksource arch_sys_counter
[ 0.141861] VFS: Disk quotas dquot_6.6.0
[ 0.141986] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.142200] FS-Cache: Loaded
[ 0.142421] CacheFiles: Loaded
[ 0.151845] NET: Registered protocol family 2
[ 0.152602] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.152731] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.152935] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.153086] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.153149] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.153403] NET: Registered protocol family 1
[ 0.153941] RPC: Registered named UNIX socket transport module.
[ 0.153967] RPC: Registered udp transport module.
[ 0.153987] RPC: Registered tcp transport module.
[ 0.154007] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.155607] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.158313] Initialise system trusted keyrings
[ 0.158485] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.167090] FS-Cache: Netfs ‘nfs’ registered for caching
[ 0.167818] NFS: Registering the id_resolver key type
[ 0.167866] Key type id_resolver registered
[ 0.167886] Key type id_legacy registered
[ 0.167916] nfs4filelayout_init: NFSv4 File Layout Driver Registering…
[ 0.170005] Key type asymmetric registered
[ 0.170029] Asymmetric key parser ‘x509’ registered
[ 0.170098] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.170259] io scheduler noop registered
[ 0.170282] io scheduler deadline registered (default)
[ 0.170597] io scheduler cfq registered
[ 0.170620] io scheduler mq-deadline registered (default)
[ 0.170642] io scheduler kyber registered
[ 0.611822] input: ts_kedei_ts as /devices/virtual/input/input0
[ 0.614679] Console: switching to colour frame buffer device 60x40
[ 0.620119] BCM2708FB: allocated DMA memory fac40000
[ 0.621705] BCM2708FB: allocated DMA channel 0 @ 413b0418
[ 0.635362] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.637006] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.640449] vc-sm: Videocore shared memory driver
[ 0.642318] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 0.655775] brd: module loaded
[ 0.677008] loop: module loaded
[ 0.678585] Loading iSCSI transport class v2.0-870.
[ 0.680961] libphy: Fixed MDIO Bus: probed
[ 0.682675] usbcore: registered new interface driver lan78xx
[ 0.685702] usbcore: registered new interface driver smsc95xx
[ 0.688761] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.920182] Core Release: 2.80a
[ 0.921850] Setting default values for core params
[ 0.923477] Finished setting default values for core params
[ 1.126889] Using Buffer DMA mode
[ 1.128514] Periodic Transfer Interrupt Enhancement - disabled
[ 1.131742] Multiprocessor Interrupt Enhancement - disabled
[ 1.135046] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.136755] Dedicated Tx FIFOs mode
[ 1.430983] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbac54000 dma = 0xfac54000 len=9024
[ 1.434412] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 1.444125] dwc_otg: Microframe scheduler enabled
[ 1.444178] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e85b8
[ 1.447486] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e890c length 36
[ 1.450874] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb83b000
[ 1.454359] dwc_otg 3f980000.usb: DWC OTG Controller
[ 1.456116] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 1.459486] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ 1.462900] Init: Port Power? op_state=1
[ 1.464613] Init: Power Port (0)
[ 1.466513] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.469836] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.473255] usb usb1: Product: DWC OTG Controller
[ 1.474970] usb usb1: Manufacturer: Linux 4.15.18-v7 dwc_otg_hcd
[ 1.478295] usb usb1: SerialNumber: 3f980000.usb
[ 1.480754] hub 1-0:1.0: USB hub found
[ 1.482530] hub 1-0:1.0: 1 port detected
[ 1.484800] dwc_otg: FIQ enabled
[ 1.484806] dwc_otg: NAK holdoff enabled
[ 1.484812] dwc_otg: FIQ split-transaction FSM enabled
[ 1.484825] Module dwc_common_port init
[ 1.485169] usbcore: registered new interface driver usb-storage
[ 1.488884] mousedev: PS/2 mouse device common for all mice
[ 1.492481] IR NEC protocol handler initialized
[ 1.494275] IR RC5(x/sz) protocol handler initialized
[ 1.496046] IR RC6 protocol handler initialized
[ 1.497779] IR JVC protocol handler initialized
[ 1.499459] IR Sony protocol handler initialized
[ 1.501111] IR SANYO protocol handler initialized
[ 1.502753] IR Sharp protocol handler initialized
[ 1.504331] IR MCE Keyboard/mouse protocol handler initialized
[ 1.507408] IR XMP protocol handler initialized
[ 1.509937] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 1.513491] sdhci: Secure Digital Host Controller Interface driver
[ 1.516595] sdhci: Copyright© Pierre Ossman
[ 1.518640] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ 1.522279] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 1.525576] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.701524] Indeed it is in host mode hprt0 = 00021501
[ 1.751471] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.755065] hidraw: raw HID events driver © Jiri Kosina
[ 1.757029] usbcore: registered new interface driver usbhid
[ 1.760437] usbhid: USB HID core driver
[ 1.764064] vchiq: vchiq_init_state: slot_zero = e96b3689, is_master = 0
[ 1.769072] [vc_sm_connected_init]: start
[ 1.778370] [vc_sm_connected_init]: end - returning 0
[ 1.780803] Initializing XFRM netlink socket
[ 1.782589] NET: Registered protocol family 17
[ 1.784420] Key type dns_resolver registered
[ 1.786519] Registering SWP/SWPB emulation handler
[ 1.788960] registered taskstats version 1
[ 1.790711] Loading compiled-in X.509 certificates
[ 1.798806] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 1.802367] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ 1.808128] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.811601] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 1.872421] sdhost: log_buf @ 950823ba (fac53000)
[ 1.908760] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.911446] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.911621] Indeed it is in host mode hprt0 = 00001101
[ 1.918892] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.923918] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.930210] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.951452] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.956271] of_cfs_init
[ 1.958217] of_cfs_init: OK
[ 1.960734] Waiting for root device PARTUUID=9c17ba5a-02…
[ 2.031666] mmc1: new high speed SDIO card at address 0001
[ 2.042779] mmc0: host does not support reading read-only switch, assuming write-enable[ 2.048441] mmc0: Problem switching card into high-speed mode!
[ 2.053461] mmc0: new SDHC card at address 0001
[ 2.056048] mmcblk0: mmc0:0001 USD00 14.7 GiB
[ 2.059952] mmcblk0: p1 p2
[ 2.083918] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 2.087734] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 2.151826] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
[ 2.155748] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.160370] hub 1-1:1.0: USB hub found
[ 2.162436] hub 1-1:1.0: 4 ports detected
[ 2.243360] EXT4-fs (mmcblk0p2): recovery complete
[ 2.253281] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.256882] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 2.261762] devtmpfs: mounted
[ 2.488496] Freeing unused kernel memory: 1024K
[ 2.851469] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 3.151760] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
[ 3.155400] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.159687] hub 1-1.1:1.0: USB hub found
[ 3.161676] hub 1-1.1:1.0: 3 ports detected
[ 3.261488] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[ 3.403384] usb 1-1.3: New USB device found, idVendor=0413, idProduct=0308
[ 3.407109] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.422563] input: HID 0413:0308 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:0413:0308.0001/input/input1
[ 3.479348] systemd[1]: System time before build time, advancing clock.
[ 3.492122] hid-generic 0003:0413:0308.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 0413:0308] on usb-3f980000.usb-1.3/input0
[ 3.515709] input: HID 0413:0308 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:0413:0308.0002/input/input2
[ 3.581922] hid-generic 0003:0413:0308.0002: input,hidraw1: USB HID v1.10 Mouse [HID 0413:0308] on usb-3f980000.usb-1.3/input1
[ 3.677640] NET: Registered protocol family 10
[ 3.681004] Segment Routing with IPv6
[ 3.710405] ip_tables: © 2000-2006 Netfilter Core Team
[ 3.998554] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 4.006442] systemd[1]: Detected architecture arm.
[ 4.017199] systemd[1]: Set hostname to .
[ 4.241481] usb 1-1.1.1: new high-speed USB device number 5 using dwc_otg
[ 4.371952] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
[ 4.375538] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.673719] libphy: lan78xx-mdiobus: probed
[ 4.816112] systemd[1]: Listening on udev Control Socket.
[ 4.821258] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.833332] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.840532] systemd[1]: Created slice System Slice.
[ 4.845885] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 4.852968] systemd[1]: Created slice system-autologin.slice.
[ 4.859445] systemd[1]: Listening on Syslog Socket.
[ 5.658312] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 5.753544] systemd-journald[97]: Received request to flush runtime journal from PID 1
[ 6.471860] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.474962] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 6.543699] pisound: Searching for spi device…
[ 6.543712] pisound: Found!
[ 6.612167] pisound: Reading card info failed: -22
[ 6.612202] pisound: pisnd_spi_init failed: -22
[ 6.612243] snd-rpi-pisound: probe of soc:sound failed with error -22
[ 6.802843] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.907054] cfg80211: Loaded X.509 cert ‘sforshee: 00b28ddf47aef9cea7’
[ 6.911026] random: crng init done
[ 6.911293] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 6.911307] cfg80211: failed to load regulatory.db
[ 6.998579] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 7.005271] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
[ 7.005669] usbcore: registered new interface driver brcmfmac
[ 7.387038] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[ 9.342134] uart-pl011 3f201000.serial: no DMA platform data
[ 9.844875] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 10.491540] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.491627] brcmfmac: power management disabled
[ 11.458059] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.458076] brcmfmac: power management disabled
[ 11.560729] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.560890] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.020905] nf_conntrack version 0.5.0 (15360 buckets, 61440 max)
[ 14.081834] netlink: ‘hostapd’: attribute type 213 has an invalid length.
[ 14.168634] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 17.392744] Bluetooth: Core ver 2.22
[ 17.392846] NET: Registered protocol family 31
[ 17.392854] Bluetooth: HCI device and connection manager initialized
[ 17.392877] Bluetooth: HCI socket layer initialized
[ 17.392892] Bluetooth: L2CAP socket layer initialized
[ 17.392933] Bluetooth: SCO socket layer initialized
[ 17.418896] Bluetooth: HCI UART driver ver 2.3
[ 17.418913] Bluetooth: HCI UART protocol H4 registered
[ 17.418925] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 17.419204] Bluetooth: HCI UART protocol Broadcom registered
[ 17.683717] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.683730] Bluetooth: BNEP filters: protocol multicast
[ 17.683754] Bluetooth: BNEP socket layer initialized
[ 27.031600] Under-voltage detected! (0x00050005)
[ 35.531789] Voltage normalised (0x00000000)
[ 41.761602] Under-voltage detected! (0x00050005)
[ 606.795517] Voltage normalised (0x00000000)
[ 610.955533] Under-voltage detected! (0x00050005)
[ 619.285931] Voltage normalised (0x00000000)
[ 621.355632] Under-voltage detected! (0x00050005)
[ 665.196092] Voltage normalised (0x00000000)
[ 669.356139] Under-voltage detected! (0x00050005)