No problem! I was digging through the diff of ctrl.pd myself a bit but didn’t reach any conclusions myself but I must admit def not versed enough in pd (yet)
want to use Orac with your eurorack
Im previewing ‘cvtools’ a collection of modules for orac…
there will be a video shortly, on my youtube channel,
but for now Ive put the details on the C&G website, as Ive been doing the work on the Organelle.
it should work fine on the rPI, as long as your DC couple audio interface is working already.
setup is slightly different for rPI, you’ll have to edit the main orac.service file currently to specify a different audio interface… perhaps we can think of something a bit more friendly later
Can you use a AC audio interface with a AC encoder?
This link explain what i´m saying… https://www.expert-sleepers.co.uk/siwaacencoder.html
basically this requires me to modulate the DC on a AC signal, but whilst I’ve sound descriptions of the hardware required - I’ve not seen specifics of how to modulate the AC modulation - and I don’t have the hardware to test it out.
if someone can tell me the specifics (e.g. frequency of AC carrier wave)
The circuit is a Envelope detector…
The AM signal is processed and transformed to a rudimental DC (positive) signal.
You might need a oscilloscope to check if this trick is working.
Hi everyone, does anybody knows how to
- Send midithru message on midiout
- Add line in sound to the orac mix.
go to the router (module s1)
midi ‘thru’ (fo/r midi notes)
on a particular chain, check that midi in is ON, and the midi in and out channel is set to non-zero
if the chain just has ‘empty’ modules then midi notes will flow thru, if you have a synth in the chain, then you will need to set note-thru =on , on the synth module in the router (e.g. a1)
it wont sent thru other midi cc etc… if you want to do that id suggest setting this up with alsa as it be more efficient… (why go alsa -> pd (orac) -> alsa)
in the router go to the relevant chain, and turn up the input gain
then audio will flow thru the chain.
(there is an audio thru, again for synths modules that usually wont pass the audio thru)
I want to send clock (start, etc)from a midi out controler to a drumbox via midi out of the pisound and play the sound of the drumbox mixed with the orac without lost the three midi chanel. The drum box as another midi chanel, is that possible with your tips?
audio, sure do as i said for 2.
midi, i would send directly via alsa… as it makes no sense (=introduces latency) to do the
routing in pd/orac
look at the aconnect command…
btw: if your using PatchboxOS, then i thought this would happen automatically,
as amidiauto by default connects everything to everything else?!
The audio in work fine thanks. But i tryed every configuration possible (master midi in, slave midi out. Master usb. Master and slave usb…) and the clock doesnt pass thru. I use pisound with patchbox os btw
Can you tell me more about the aconnect please?
It connects by default only MIDI software with hardware MIDI ports. In case you want hardware to be connected to hardware, you’ll have to set up the rule in /etc/amidiauto.conf.
See this thread: Midi connection manager, it should contain everything you need to know.
Keep in mind that when activating ORAC, the config from
/usr/local/patchbox-modules/orac/amidiauto.conf gets copied to
ok thank you! i jump to the thead because it’sstill not totally clear to me!
Ok I’ve got cvtools installed and working with pisound. Still kinda scratching my head on how routing would be done for the left and right inputs. As one for note, one for mod. I’ll keep twiddling.
What are you trying to do precisely?
Note: The pisound hat is not dc coupled so won’t work for cv
I’m using an ES8 but any dc coulpled audio interface should work.
I swear I read it was, must be the Mandela Effect. It does seem to be working. I’m not sure how well for pitch since I have been trying out with an SQ1 by itself.
Outputs are dc coupled, input ac
The Pisound’s input is AC coupled, the output is DC coupled. However, keep in mind that audio outputs usually don’t provide the entire CV voltage range, Pisound should have 0~2.5V output range, so you’d have to additionally scale it up to 0-5V or whatever range your system uses.
Hi, i am a Beginner with Orac on RP3+ from Berlin,
so i have no Ideas anymore.
Installed Patchbox, Updates, Orac Modules on the RaspberryPi with PiSound
Can hear the Drumloop and Midi Keyb.
But in the Main.PD nothing choose the modules like in Mark‘s Videos. Only the Drumloop is playing.
I dont no whats is my mistake.
I saw all the Intruction Videos from Mark
Can anybody help?
Running Orac 2.0 in console mode - how can I find/get pd’s console log output?
Answering my own question from a tip elsewhere:
journalctl -u orac