# Modep + PureData

**URL:** <https://community.blokas.io/t/modep-puredata/1522>\
**Category:** General\
**Created:** [March 18, 2020, 6:02pm UTC](https://community.blokas.io/t/modep-puredata/1522 "2020-03-18T18:02:13Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Taylortronic](https://community.blokas.io/user_avatar/community.blokas.io/taylortronic/32/435_2.png) [@Taylortronic](https://community.blokas.io/u/Taylortronic)\
**Post date:** [March 18, 2020, 6:02pm UTC](https://community.blokas.io/t/modep-puredata/1522/1 "2020-03-18T18:02:13Z")

</div>

Is there a way to run PureData patches alongside the Modep environment?

---

<div class="post-metadata">

**Author:** ![Giedrius](https://community.blokas.io/letter_avatar_proxy/v4/letter/g/6a8cbe/32.png) [@Giedrius](https://community.blokas.io/u/Giedrius)\
**Post date:** [March 18, 2020, 9:08pm UTC](https://community.blokas.io/t/modep-puredata/1522/2 "2020-03-18T21:08:44Z")

</div>

It’s possible, after installing MODEP, you may then activate the Pure Data module to autostart your patch, and enable MODEP in parallel manually by running:

```auto
sudo systemctl enable modep-mod-ui # This makes it run on reboot automatically
sudo systemctl start modep-mod-ui # This makes it run now

```

You can use stop and disable in the middle of the command for reverse effect.

---

<div class="post-metadata">

**Author:** ![Taylortronic](https://community.blokas.io/user_avatar/community.blokas.io/taylortronic/32/435_2.png) [@Taylortronic](https://community.blokas.io/u/Taylortronic)\
**Post date:** [March 19, 2020, 3:51pm UTC](https://community.blokas.io/t/modep-puredata/1522/3 "2020-03-19T15:51:32Z")

</div>

THANK YOU  
much appreciated