# First Run failure - no openssl image **URL:** \ **Category:** Patchbox OS\ **Created:** [September 5, 2021, 5:19am UTC](https://community.blokas.io/t/first-run-failure-no-openssl-image/3239 "2021-09-05T05:19:42Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![stuzog](https://community.blokas.io/user_avatar/community.blokas.io/stuzog/32/2219_2.png) [@stuzog](https://community.blokas.io/u/stuzog)\ **Post date:** [September 5, 2021, 5:19am UTC](https://community.blokas.io/t/first-run-failure-no-openssl-image/3239/1 "2021-09-05T05:19:42Z")
First Run failure with/without monitor connected: from iMac 7,1 El Capitan. I got this: bash$ ssh [patch@192.168.1.20](mailto:patch@192.168.1.20) dyld: Library not loaded: /usr/local/opt/openssl/lib/libcrypto.1.0.0.dylib Referenced from: /usr/local/bin/ssh Reason: image not found Trace/BPT trap: 5 Will try re-flashing. UPDATE: Working after re-flash; but ssh’d from High Sierra MacBook Pro. Maybe the Captain has had his last biscuit… Even brew is abandoning it. UPDATE#2 – I’m using a HiFiBerry DAC+ but it isn’t listed and the compulsory setting of Jack didn’t work – no instructions as to what to do at this point so the setup process failed. Now doing a very long package installation. It might be finished by the end of next week… ---
**Author:** ![Giedrius](https://community.blokas.io/letter_avatar_proxy/v4/letter/g/6a8cbe/32.png) [@Giedrius](https://community.blokas.io/u/Giedrius)\ **Post date:** [September 6, 2021, 6:44am UTC](https://community.blokas.io/t/first-run-failure-no-openssl-image/3239/2 "2021-09-06T06:44:56Z")
> [@stuzog](#): > > bash$ ssh [patch@192.168.1.20](mailto:patch@192.168.1.20) > dyld: Library not loaded: /usr/local/opt/openssl/lib/libcrypto.1.0.0.dylib > Referenced from: /usr/local/bin/ssh > Reason: image not found > Trace/BPT trap: 5 This error comes from your host computer, not the Patchbox OS itself. > [@stuzog](#): > > UPDATE#2 – I’m using a HiFiBerry DAC+ but it isn’t listed and the compulsory setting of Jack didn’t work – no instructions as to what to do at this point so the setup process failed. Now doing a very long package installation. It might be finished by the end of next week… Refer to the audio card documentation on what has to be done for it to be detected. You may have to add some `dtoverlay=...` line in `/boot/config.txt`, if the audio card doesn’t have the EEPROM to get identified automatically.